Counterattack construction crusher installation test and operation procedures from xuan's blog

In order to better and reasonably use the counter-attack construction waste crusher for the majority of users, customers must read the usage instructions of the counterattack-type construction waste crusher, based on the market needs, based on the domestic and foreign advanced western crushing equipment. , Successfully developed a straight-through adjustable western crushing equipment. The equipment can be widely used in: cement, refractory materials, building materials and artificial sand making industry, and the western broken operation of medium-hard stone materials such as limestone, river pebbles, dolomite, blast furnace slag, coal ore, and refractories. It is especially suitable for the crushing of artificial sand and road pavement stone. Counterattack construction crusher crusher equipment has large crushing ratio, high crushing moisture content, the most ideal processing of materials with high moisture content, and the discharge particle size can be arbitrarily adjusted. There is no screen strip equipment, materials with large mud volume will not be blocked and cannot be broken. Into the body can be automatically discharged, will not cause the loss of equipment. The equipment crushes material DC, has high production efficiency, unique structure, stable operation, low noise, easy maintenance, and easy replacement of wearing parts by opening the working compartment door. Counterattack construction crusher installation test 1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts. 2, the installation should pay attention to the vertical and horizontal body. 3. After installation, check whether the bolts in each part are loose and whether the main door is tight. If yes, tighten it. 4, according to the power of the device configuration power cord and control switch. 5, the inspection is completed, the empty load test, the test can be normal production. Counterattack construction waste crusher operation procedures 1. Before starting the machine, check whether the body door is closed tightly. Do not open the door during the operation of the machine to prevent danger. 2. The counter-attack construction waste crusher must be started with no load, and it can be produced after it is operating normally. 3. The particle size of the feed must be in accordance with the requirements, and excessive equipment damage and low output will occur. 4. If abnormal phenomena are found during the crushing process, stop the inspection and remove the fault before proceeding to production. 5. Regularly add lubricating oil to the rotating bearing parts.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment

Choose language

Chinese (Traditional)EnglishFrenchGermanHebrewHindiItalianJapaneseRussianSpanish

Share With Friends


Destinos Exotico Filming Donations

Make a Donation To The Destinos Exotico Film Fund

Thank You For Your Kindness and Generosity